Easy BlindScan Pro
Overview
Easy BlindScan Pro is a software designed for make it easy satellite blindscanning with advanced features!
Download:
| Latest release | Date: 20 Feb., 2012 | Stable: 6.0.0.2 | |
| Pre-Release (beta) – Use at you own risk | Date: | Beta: | |
| PAD XML File (For websites of Software) | Latest release info | Latest release info |
License:
- Shareware – 21 € (~26 USD)
You can try it before buy for free with all features enabled (10 times, then expire).
Platforms:
Windows XP/2003/2008/Vista/7 (x86/x64).
Requirements:
.NET Framework 4.0 ( Download )- Internet connection for first registration.
Easy BlindScan Pro support this devices:
- Full supported devices: STV090X based: Omicom S2 PCI, TT S2-1600, Prof 7301/7500/8000, TBS 6925 V1.x & 2.x, TBS QBox2(5920), TBS QBox-CI(5980), TBS 5925.
- STV0288 based: TBS 8910, Prof 6200, TeVii S420.
- Partial supported devices (no real blindscan): TT S2-3200, S2-3600, S2-3650.
General support:
- E-Mail support is absolutely free. support@cjcr-soft.com
- Support forum (English / Spanish)
Screenshots:
Changelog:
> 6.0.0.2 Pro (stable) [20 Feb, 2012]
- Add: Signal Analyzer: Added status bar with sat name, SatID, and device name.
- Fix: Signal Analyzer: Command line arguments are fixed.
- Fix: Some bugs are fixed.
> 6.0.0.1 Pro (beta) [14 Feb, 2012]
- New: Options; Added config options for new BSAlgo and BSPass for the new streamreader.
- New: Options; New option to change the diseqc mode (Auto, Forced and Manual)
- New: Main; Option in Satellite tab to Send Diseqc commands.
- Imp: Signal Analyzer; Tune Mode now supports input the frequency in kHz.
- Fix: Important bugs on BlindScan engine (for example, sometimes scan the same frequency every time)
- Fix: Some minor bugs are fixed.
- Upd: Streamreader updated to latest version (thanks CrazyCat)
> 6.0.0.0 Pro (beta) [08 Feb, 2012]
- New: Signal Analyzer; A option to tune in transponder manually (SetChannelExEx())
- New: Main; A option to ‘Tune in & Analyze transponder’ in transponder list (SetChannelExEx())
- New: Signal Analyzer; Option to refresh transponder info.
- New: RFScan; Now shows in the graph the transponders you can lock/no lock with the Signal Analyzer.
- New: RFScan; Option to show the carrier width in the graph.
- New: RFScan; Curve in graph are more smoothed.
- New: RFScan; Auto zoom graph when stops RFScan before ends.
- New: RFSCan; Zoom support (Left-click on graph to select start point and another left-click to other point of graph)
- New: RFScan; Added “Show ‘Peak’ line” option.
- New: A basic positioner console (DiSEqC 1.2).
- New: Main; Support for pause/resume blindscan (you can look a signal and then continue with the blindscan)
- Add: USALS support (need test!).
- Imp: Main; Scan ranges is moved to Blind Scan tab (Click on Ranges button)
- Imp: RFScan; Graph now have more precision (KHz, before in MHz).
- Imp: Main; DISEqC List supports drag and drop for change the order of items and some others improvements.
- Imp: Copy Pattern rewrite and now I’ve added a button for Auto-Config with some profiles.
- Imp: Device list only shows DVB-S/S2 devices (With new CheckForDVBExEx() function in streamreader.dll)
- Fix: TS Speed in status bar sometimes return a wrong values.
- Fix: Problem with upper/lower case in register window is fixed (Thanks to ACRadio for the report)
- Fix: Some bugs and improvements.
- Upd: Streamreader updated to latest version.
> 5.0.1.5 Pro (stable) [13, Jan, 2012]
- Add: DVBViewer/TransEdit support for 16APSK (16QAM) and 32APSK (32QAM) in INI file. (Some users report the ‘hack’ works with some TBS cards for 16APSK)
- Fix: Sometimes Signal Analyzer hangs or works too slowly.
- Fix: Some parameters of Main/Optional/Copy pattern are wrong.
- Fix: Some fixes in DVBViewer/Transedit INI format for L/R polarity.
- Chg: This version only works with .NET Framework 4.0 (Download: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851)
> 5.0.1.4 Pro (beta) hotfix [11 jan, 2012]
- Fix: A problem with sync thread that calls to streamreader.dll (sometimes blindscan/rfscan don’t work)
- Upd: Streamreader updated to version 1.0.8.838 (In some USB devices Transport Stream don’t work.. in this version works again!).
> 5.0.1.3 Pro (beta) [10 jan, 2012]
- Add: New info in BlindScan list (MIS, BER, lock time, and comments from satfeeds.info).
- Imp: Added specific support for SmartDVB INI format.
- Imp: Support for Mod/Std/RollOff/Pilot in DVBViewer/TransEdit *.INI file.
- Imp: Registration* system is now more robust.
- Imp: BlindScan is now more precise and a bit faster.
- Fix: AltDVB INI format fixed.
- Fix: BlindScan engine bug with scan steps are solved.
- Fix: Some satfeeds.info integration fixes and improvements.
- Fix: Some bugs are fixed.
- Upd: Reverted Streamreader to version 1.0.7.795 (> 1.0.8 seems fail with some cards with SetFilter()).
* With this version you need to register again the software with the Email & Password I’ve sent by e-mail when you purchased it. Nothing more.
> 5.0.1.2 Pro (beta) [08 jan, 2012]
- New: Time elapsed in Blindscan now is refreshed in real-time.
- Imp: Some optimizations in threads handling.
- Fix: Ini format for SmartDVB fixed.
- Fix: Wrong value in list of transponders for freq in some systems.
- Fix: The BER report in XML file sometimes make a not usable data for EBS (remove)
- Fix: Open Signal Analyzer from a C-Band transponder = crash.
- Fix: Problem with SNR with some regional configs are fixed.
- Fix: Some bugs are fixed.
*Satfeeds.info are back for this beta.
> 5.0.1.1 Pro (beta) [04 jan, 2012]
- Imp: Now remember the last parameters for the Signal Analyzer.
- Imp: Scan Ranges now support Symbol rates lower than *1000KS (The minimal now is 100 Ks)
- Imp: List of transponders is usable when are scanning (for change the order of columns for example)
- Fix: Start UDP Stream from Signal Analyzer sometimes don’t work.
- Fix: The RF Scan doesn’t start with steps lower than 1 MHz (e.g. 0,1 … 0,9 MHz).
- Fix: Added some messages in registration dialog and some bugs fixed there.
- Fix: Support of Framework 2.0, 3.0, 3.5 are back.
- Upd: StreamReader update to latest version (1.0.8.827)
> 5.0.1.0 Pro (beta) [02 Jan, 2012]
- New: BlindScan is now written inside EBS (No more BLScan.exe!).
- New: RF Scanner.
- New: Signal analyzer.
- New: UDP Stream.
- New: Multiple Input Stream (MIS) detection and selection.
- New: Advanced DiSEqC config.
- New: Sort transponders list by Freq, pol, signal, …
- New: Full device control (Stop, restart ..)
- New: Better devices detection method.
- Fix: Some improvements and some bugs are fixed.




